DEPOSIT ONLY Laser My Wheels Gen. 1 Workstation

Place a 25% deposit on your very own wheel engraving laser workstation!

The minimum deposit secures your order, placing your machine(s) in our manufacturing queue.

Remaining balance due in full prior to shipment of your completed order.

ACH, or direct billing options are available for payment of deposit.

Overview:

• Monitor: Included
• Workstation Dimensions: 42in W x 40in D x 60in H
• Workstation Weight: 800lbs (362.87kg)
• Minimum Diameter: 15in (all rotary options)
• Maximum Diameter: 32in (w/Stage 3 Rotary)
• Manufacturing Leadtime: 6-8 weeks
• Deposit Required: Minimum 25%, Optional
• Patent: Pending

Workstation Features:

• 3/16" steel frame construction
• Machined aluminum tabletop
• Casters with adjustable leveling feet
• Manual hydraulic wheel support, with roller bearings
• Support tower mounted to linear guide bearings
• Machined aluminum rotary mount plate bolts to the support tower.
• Can be drilled and tapped to mount many different styles of rotaries, or other work handling devices

Overview:

• Laser System: Optional
• Control Software: LightBurn
• Laser Source: JPT M7 200W/350W MOPA Fiber; Optional
• Scan Head: Galvo
• Compatible Lenses/Marking Area: 110*110mm, 150*150mm, 175*175mm, 200*200mm, 300*300mm
• Lens Included: 1 Focal Lens included w/laser system; Additional sizes available.
• Camera: Included w/Laser System; Standard
• Z-Height: 800mm (31.49in)
• Power Requirements: 15A/120V (Dedicated, APC back-up recommended)

Overview:

• Rotary Device: Optional
• Stage 1 Rotary Work Handling: 15in (35.56cm) through 20in(45.72cm); Tested through 60 lbs (24.94kg).
• Stage 2 Rotary Work Handling: 15in (35.56cm) through 24in(60.96cm); Tested through 80 lbs (34.01kg).
• Stage 3 Rotary Work Handling: 15in (35.56cm) through 32in(81.28cm); Tested through 110 lbs (47.63kg).
• Rotary Fixturing Kit: Optional; Sold Separately

Rotary Features:

• Self-centering 3-jaw chuck included
• Can be used in any position
• Fully sealed aluminium housing
• Low maintenance thanks to oil bath
• Cross roller bearings for high loads and strong reversing
• Virtually backlash-free worm drive, adjustable via eccentric cam, with low-wear material combination
• Computer-optimised worm drive for quiet running and increased drive efficiency
• Large spindle opening
• Dividing spindle with indexing slot
• Optionally available: end switch that acts directly on the worm gear and motor flange systems for attaching various motors

MOPA Fiber Laser systems are Class IV, and while in operation, Personal Protective Equipment (PPE) must be worn, to include:

• Laser safety glasses, or goggles rated for 1064nm wavelength

Each laser system comes with two pair of laser safety glasses, rated for 1064nm wavelength.

In addition to PPE, avoidance of flammable, or combustible materials in the operations area of a Class IV laser system is strongly advised.

The following procedures are also strongly advised:

• Avoiding skin contact with the beam path
• Operate Class IV lasers in a well ventilated area
• Include the use of fume extraction equipment while in operation
• If possible, operate lasers in a controlled access environment by authorized personnel who are trained on the subject of laser safety
• Where controlled access locations are not possible, or feasible other options for shielding are recommended to protect workers, or clients.

You can view our Laser Safety Products here